How to make network patch cord cable?

Network cable is essential for LAN connection.In the local area network common network cable mainly has the twisted pair, the coaxial cable, the optical cable three kinds.Twisted pair is a data transmission line composed of many pairs of wires.It is characterized by low price, so it is widely used, such as our common telephone line and so on.It is used to connect to the RJ45 connectors.
Network cables are mostly used for the same potential and voltage transmission and for short-circuiting and connecting two wires.For precise voltage requirements, the voltage drop generated by a little metal jumper can also have a big impact on product performance.

Network jumpers are also called finished network cables, which are classified into super five types of network jumpers, six types of network jumpers, seven types of network jumpers and eight types of network jumpers.
The network cable is used for data transmission and connection to the local area network and for transmitting information within the network.
There are two line sequences of network cable: T568A and T568B. Here, the line sequences of class B are used (white orange, orange, white green, blue, white blue, green, white brown, brown).
First, use net pliers to peel off the outermost protective glue at one end of the network cable, revealing 8 copper wires with protective glue.
Then, separate the tangled wires, straighten the copper wires with your fingers and arrange them in the B order (from left to right, white orange, orange, white green, blue, white blue, green, white brown, brown). Use net pliers to cut the ends of the wires flat
One hand has been cut flat net wire, the other hand of the crystal head with the metal side facing yourself, along the wire inserted, and then use the net pliers to press down the copper crystal head
Repeat the above three steps and press the other end of the net cable into the crystal head in the same line order
Insert the two RJ45 heads of the finished network cable into the two network ports of the host end and the far end of the network cable tester respectively. Test whether the indicator lights of the host end and the far end are consistent. If they are consistent, the network cable has been completed.
This connection method because there is no machine forming, so the use may be unstable, easy to loose, professional production of network cable manufacturers, can directly provide finished products, machine forming, convenient and durable.